Uhu - Plus Endfest 300 Epoxy Adhesive - Pack of 2

UHU EPOXY ULTRA STRONG, Universal strong dual-component epoxy adhesive SUITABLE FOR:- Suitable for repairs to metal, ceramics, porcelain, crystal, glass, pearls, precious stones and various synthetics (polyester, bakelite, formica, rigid polystyrene and acrylic glass (Perspex). , BEFORE USE:-, Working conditions-Only apply at temperatures between +10 degree C and +35 degree C. Product cures by mixing the resin and the hardener. , Personal safety-Preferably wear gloves. , Surface requirements-The surface must be dry, clean and free of dust and grease. , Preliminary surface treatment-Degrease parts to be bonded with methylated spirit. Roughen smooth surfaces (sandpaper). , Tools-Mix the components by means of the supplied mixing bowl and spatula. , Mixture ratio-1:1 , Coverage-1 ml = approx. 1 cm at a film thickness of 1 mm , Directions for use-Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with a spatula until a mixture is obtained with a homogeneous colour. Apply the mixture, which at room temperature (+20 degree C) remains toolable for about 1.5 hours, as a thin layer on one of the two materials. Join the materials and keep them in place for 7 hours. Be careful not to move the parts before the adhesive has cured. Resin and hardener must not come into contact with each other unless for usage. , Storage conditions-Store in tightly closed packaging in a dry, cool and frost-free place.