Description
Simply put the temperature patch through the hole in one of the non-woven tape pieces, completely tear the release paper, and stick the soft silicone patch to the baby's armpit. Detailed Instructions: , 1. Take out a piece of non-woven tape, put the temperature patch through the hole. Peel off the release paper1, then stick it on the back of the temperature patch. , 2. Remove the release paper2 and paper3, then attach the temperature sensor to the back of the non-woven tape. , 3. Stick the fixed temperature sensor to the armpit, and press lightly to make sure it is successfully stuck to the skin. Note:, 1. It is recommended to replace at least every 24 hours., 2. Keep dry and out of direct sunlight. ,
