Description
Clinisept+ Prep & Procedure should be applied to clean skin. Before application, use a suitable make-up remover to remove any make-up or contaminants. Apply Clinisept+ to the whole area to cleanse the skin prior to any cosmetic or aesthetic treatment. An aseptic procedure should always be followed.Clinisept+ Prep & Procedure can be applied directly from the bottle onto a sterile gauze or cleansing pad, or can be poured into a clean gallipot. If using a gallipot, ensure a clean pot is used for each patient and discard any unused Clinisept+. Apply Clinisept+ Prep & Procedure by wetting a sterile gauze or cleansing pad with Clinisept+ and then gently wiping over the area using a circular motion. 10ml is sufficient to saturate one standard 10cm cotton gauze pad. The recommended volume per treatment is 30-50ml. The volume of Clinisept+ applied should be adjusted to suit the size of the area to be cleansed. In all instances, ensure the whole area is thoroughly wetted. Sterile gauzes and pads should be replaced and discarded as necessary. If applying Clinisept+ around the eyes, ask the client to close their eyes before wiping onto the eyelids. Clinisept+ is rapid in action and requires a wet contact time of only 15 seconds. Once applied, Clinisept+ Prep & Procedure leaves no residue on the skin and can be left to dry naturally. Do not dry or touch the skin after application unless with clean hands or sterile gloves Cleansing before, during, and after a procedure: A skin neutral pH and non-cytotoxic chemistry allow Clinisept+ to be used before, during, and after treatment, thereby enabling high levels of hygiene to be maintained throughout a procedure. Use fresh sterile gauzes or cleansing pads as required and discard used pads. Clinisept+ Prep & Procedure provides a cooling and calming sensation and is very effective in reducing redness.
