Description
Give your damaged hair a new lease on life with our exclusive two-phase complex! This powerhouse rebuilds damaged hair structure by repairing damaged disulfide bonds and replenishing keratin. It has a concentrated formula that intensively regenerates strands after chemical treatments such as coloring, permanent waving, straightening, or lightening. It’s like a total hair renovation!
Dr. Plex Phase 1:
* Replenishes keratin before, during, and after aggressive chemical treatments.
* Restores and regenerates disulfide bonds in the hair.
Dr. Plex Phase 2:
* Works closely with Dr. Plex Phase 1. This step was developed to complete and finish the treatment.
* It is a concentrate of therapeutic substances, maximizing efficiency and guaranteeing excellent results.
How to Use:
PROTECTION DURING HAIR DYEING AND LIGHTENING
1. Mix Dr. Plex Phase 1 with the dye or lightening powder according to the proportions indicated in the table.
Dr. Plex Phase 1
* 5 ml with 30 ml Colour
* 10 ml with 60 ml Colour
* 10 ml with 60 gms Lightening Powder
2. Powder lightening time should be in accordance with the powder manufacturer's instructions.
3. Check your lightening progress periodically. The lightening, not Dr. Plex, causes any irritation reactions during lightening. If irritation occurs, rinse hair thoroughly with water.
4. Rinse your hair thoroughly with lukewarm water.
5. Apply 15 ml of Dr. Plex Phase 2 to the entire length of the hair, starting from the ends. The minimum time to leave Dr. Plex Phase 2 on is 10 minutes (for damaged hair, the recommended time is 20 minutes).
6. Rinse with lukewarm water Dr. Plex Phase 2.
7. Wash your hair with Dr. Plex Shampoo for damaged hair.
8. Use Dr. Plex Conditioner for Damaged Hair. Rinse the conditioner with lukewarm water.
CARE DURING HAIR SMOOTHING
1. Use after the hair smoothing procedure recommended by the manufacturer.
2. Mix 10 ml of Dr. Plex Phase 1 with 30 ml of water.
3. Apply Dr. Plex Phase 1 to hair. Leave on for 8 minutes, then rinse with water.
4. Apply 15 ml of Dr. Plex Phase 2 to hair. Leave on for 10 minutes, then rinse thoroughly with water.
5. Use Dr. Plex Damaged Hair Shampoo, then Dr. Plex Damaged Hair Conditioner. Rinse.
HAIR PROTECTION DURING PERMANENT WAVES
1. Use after the permanent wave procedure recommended by the manufacturer.
2. Mix 10 ml of Dr. Plex Phase 1 with 30 ml of water.
3. After applying the neutralizer to the rollers, apply Dr. Plex Phase 1. Action time is 5 minutes.
4. After 5 minutes, remove the rollers and rinse your hair thoroughly.
5. Apply 15 ml of Dr. Plex Phase 2 and leave on for 10 minutes. Then rinse with lukewarm water.
6. Use Dr. Plex Damaged Hair Shampoo, then Dr. Plex Damaged Hair Conditioner. Rinse.
